[GrizHFMinimill] Re: R8 Hex collet ?

Thanks to Paul in MA, I think I have the answer. I turned a piece of 1-1/4" steel round stock to 5/8" on one end, to be threaded 5/8" NF to fit the hole saw, and 7/8" on the other end to fit my largest standard 7/8 R8 collet. The center is left as-is to act as a positive stop for the holesaw. I may have to spring for an adjustable 5/8 tap but the rest of the piece is done. I dunno why I didn't think of that - I guess that's why I like this group ! Thanks-Pete

--- In GrizHFMinimill@yahoogroups.com, Bill Williams <BWMSBLDR@...> wrote:
>
> blazertrails wrote:
> > Is this kinda what your looking for?
> > http://www.harborfreight.com/pipe-tubing-notcher-42324.html
>
> Dale, while I have one of those things and it works a mill is a LOT
> better! My comments on good hole saws fitted to the holder apply!
>
> Bill in Boulder
>

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)

<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/