<http://www.littlemachineshop.com/products/weekly_special.php>
Graciously,
Jim E.
Lakewood, Calif.
All Hail Rube Goldberg!
a rien wrote:
>
>
> For all of the reasons that Rob listed, were pretty much spot on. I
> wouldn't advise buying small to see if it will work for you, and then
> going up from there. The Mini Mill for my uses I find fairly acceptable.
> Most of its shortcomings can be addressed pretty easily. For me, I
> installed a set of DRO scales, belt drive, and air spring.
> I like the R8 tooling its usually priced reasonably, and easy to find
> and also will fit a larger machine if you go that way one day.. The one
> thing that I think would be helpful is a larger table which wasn't an
> option when I bought my mill. Using even small fixtures takes up more
> real estate than you'd believe.
> If I were to do it again, at this time, I'd go with the LMS machine
> with the Hi Torque motor and larger table, or go to an X3.
> Anthony
>
> ------------------------------------------------------------------------
> From: morgan_maxson <morgan_maxson@yahoo.com>
> To: GrizHFMinimill@yahoogroups.com
> Sent: Wednesday, October 12, 2011 5:46 PM
> Subject: [GrizHFMinimill] microlux micro milling machine
>
> for a beginer i thought i would try a smaller mill first. i was
> wondering if anyone has any expereance with microlux micro milling
> machine,the that is kinda supposed to be like sherline. just looking
> to hear if you like it,pros and cons so to speak.
> thanks in advance morgan_maxson@yahoo.com
> <mailto:morgan_maxson@yahoo.com>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
> GrizHFMinimill-fullfeatured@yahoogroups.com
> <mailto:GrizHFMinimill-fullfeatured@yahoogroups.com>
>
>
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/