looks like this one. except for the colors, and the stand. mini mill CLOSEOUT 499.95 (I think that is over 500 with shipping and tax) http://littlemachineshop.com/products/product_view.php?ProductID=4223&category=1387807683
Thanks again
I just got the manual, its good!
The one from Harbor freight is as useful as a pet rock for anything other than ordering replacement parts.
At 04:13 PM 10/25/2011, michael kolchins wrote:
Glad you got the chuck to hold. You pulled the "spindle". You pulled the Morse taper or R-8 holder actually.The spindle is what you referred to as the shaft.We all had trouble with the terminology when we started.
Go to the Little Machine Shop website, they have all the information you need for your mill.You can download information for your mill,much better than even a manual.If you want a manual,download the one at Grizzly website.Both machines are pretty much identical.
mike
On Sun, 23 Oct 2011 20:51:03 -0000, you wrote:
>I am new to the machine tool thing in general. So I don't yet know all the terms and tool names.
Everybody starts there.
>
> I bought a used mill. It has a taper chuck to the Drive shaft.
>
Typically, there's a pair (or one) letter and a number. The number
indicates size (diameter) and the letters indicate taper.
Typical to find are R-3 and MT2 and MT3.
>On my first attempt to use it the chuck falls off the taper.
If the chuck falls off the taper itself, then it's not pressed on
firmly and properly. All the chucks (I assume you mean drill chuck)
are expected to come with a taper which matches the spindle in the
mill.
The drill chuck taper is normally a Jacobs taper (JT-somenumber), or a
similar thing.
However, the drill chucks generally are self holding, and you just
press them on (properly).
The key is that the other chucks need a drawbar. The spindle is
hollow, and there's a threaded rod that pulls the taper back into the
spindle. Do not tighten it excessively.
>
>What is the procedure for putting it on and having it stay?
drawbar.
Harvey
>
>SS
>
>
>
>------------------------------------
>
>Yahoo! Groups Links
>
>
>
__._,_.___