As far as vendor sources, I was able to fit one of these 24-LED 80mm rings for $4.86
http://www.dealextreme.com/p/t10-24-led-white-light-car-angel-eye-80mm-diameter-26001
Around one of these 15-LED 60mm rings for $3.28
http://www.dealextreme.com/p/t10-15-led-white-light-car-angel-eye-60mm-diameter-25513
And put one of these 48-LED festoons for $7.96 behind the concentric rings
http://www.dealextreme.com/p/t10-ba9s-festoon-2-88w-12v-48-led-car-ceiling-dome-white-light-bulb-18060
Nothing extends out beneath the edges of the mill head, yielding a very clean installation.
Rob Potter
Portland, OR
From: GrizHFMinimill@yahoogroups.com [mailto:GrizHFMinimill@yahoogroups.com] On Behalf Of a rien
Sent: Sunday, December 25, 2011 7:36 AM
To: GrizHFMinimill@yahoogroups.com
Subject: Re: [GrizHFMinimill] Ring light measurements
Great comparison info..Would you share that Ebay vender's contact #??
Thanks
Anthony
--- On Sat, 12/24/11, g_liming <g_liming@yahoo.com> wrote:
From: g_liming <g_liming@yahoo.com>
Subject: [GrizHFMinimill] Ring light measurements
To: GrizHFMinimill@yahoogroups.com
Date: Saturday, December 24, 2011, 5:34 PM
Hello,
Back a while ago there was some discussion about LED lighting, and I built a ring light for my mill using a 39 LED 120 mm ring I bought on Ebay for $6. I was pretty happy with the way it looked, but I also took some measurements.
Using a 12V supply, I turned it on and measured a current draw of 200ma. Placing a light meter on the table of the mill and positioning the bottom of the ring 12 inches away, I measured the light intensity to be 546 lux with no other ambient light. This LED light does not get warm, it is almost impervious to flying chips, and provides a very even light without shadow. I don't know what the wavelength or black body temperature of it is, but it is pretty close to a cool white, not like some of the bluish ones I've seen that are called "white."
For comparison's sake, I took the same meter and placed it on the top of my drill press table, which uses one of those magnetic base task lights like this . I positioned the light source 12 inches from the bottom of the bulb to the meter, also with no other ambient light. A regular household white incandescent 40 watt bulb was 420 lux, a 60 watt was 912, and a 100 watt bulb was 1740. Therefore, I believe the LED ring light is roughly the same as a 50 watt bulb. Seeing as how I use a 60 watt bulb in it normally (A 100 is just too hot to work around) I am pretty happy with the LED ring. I suppose you could use this 120mm ring with a 180mm ring outside it and have a 100 watt LED equivalent if you wanted.
Just for fun, I also measured a couple of CFLs. A 13 watt CFL (advertised as a 60 watt equivalent) turns on at 340 lux, but within 4 minutes settles down at 936 lux. A 26 watt CFL (advertised as a 100 watt equivalent) turns on to a measly 194 lux, but in 4 minutes is giving out 1290 lux, still a fair bit away from a incandescent 100 watter.
Just thought I would share that data.  Happy Holidays,
|
__._,_.___
__,_._,___