>
> Chuck,
>
> I am also looking for such a dog clutch. My design does not disconnect
> the drive and there as a few times when it would be nice to not have a
> power feed connected. That being said I have found that most of the time
> the power feed is used. The exception is the fine set up for drilling
> holes, etc.
>
> My requirement is that no holes be drilled into the mill and it must be
> removable.
>
> I would like to know your ideas/requirements. Perhaps others can help us
> arrive at a workable solution.
>
> Cheers,
>
> Andrew in Melbourne.
Andrew, check this out:
http://www.littlemachineshop.com/Projects/Drawings/ClutchConnnector.pdf
The link was sent to me in respone to the same question on another forum. I've saved and printed it, and am currently studying it. But I'm not quite understanding how it works.
Chuck in E. TN
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/