--- In GrizHFMinimill@yahoogroups.com, "A. J. Nagy" <ajxnagy@...> wrote:
>
> I have the same problem with batteries dying - I have taken to removing them
> after use. I also found that the batteries that supposedly died still
> worked when I put them back into the units. I have not tried any other
> batteries except the ones that came with the units. Perhaps the original
> equipment batteries are poor quality. The units still use some current when
> shut off otherwise the axis settings would be lost when you shut down the
> machine when the wife calls you for dinner.
>
>
>
> I have considered modifying the units to be run off of a wall wart but have
> not had the courage to take a soldering iron to the units. I assume that a 6
> volt transformer would do the trick. Anyone tried this?
>
>
>
> AJ
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/