would be the pull the motor and open her up. The windings may have been
damaged. If that is the case then a replacement motor or rotor is the
only repair.
Cheers,
Andrew in Melbourne
On Sat, 2012-01-21 at 19:44 +0000, miner49r wrote:
>
> This morning I started hearing noises from my mill. It sounds like an
> arc of electricity jumping across a spark plug. At first the sound was
> intermittent but has gradually become more consistant. I pulled the
> brushes and there is no sign of arcing there.
>
> This sparking noise seems to be comong from the lower end of the
> motor. Has anyone here experienced this symptom and know of a repair
> fo it?
>
> Thx, Alan
>
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/