--- In GrizHFMinimill@yahoogroups.com, "dave_mucha" <dave_mucha@...> wrote:
>
> my beef with the table design is that there is no easy way to lube the ways.
>
> have you though about putting in oil channels and oil cups ?
>
> it seems that if one were to drill tiny holes and put oil cups on them, that it would be very easy to lube the ways on all 4 locations.
>
> I have thought about this but have not come up with a workable and accessible method.
>
> I hate the squirt oil towards that gap and hope some seeps in method of oiling the ways.
>
> It seems that with a 'spare' table, there is room for experimentation !
>
> Dave
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/