--- In GrizHFMinimill@yahoogroups.com, "Yuriy K" <ycroosh@...> wrote:
>
> Hello,I'm working on a "smart" power feed for my mini mill. The skinny
> is: I wanted a stepper-driven power feed that can be set to a "home"
> position and then stop once it reaches it. With parts from eBay and
> Mouser my cost is roughly $90-$100 (plus some aluminum for the
> enclosure); Arduino will add $20-$35. The newest version (two revs newer
> than the one on the blog) displays feed rate in inches/minute and five
> color leds indicate relative distance to the home position. More
> gruesome details are posted on my blog here:
> http://www.yuriystoys.com/2012/01/mini-mill-power-feed.html <Hello,
> I'm working on a > . I started building the project with MSP430
> microcontroller using a custom board I designed for myself (a basic
> breakout for MSP430F2132). It looks like there is no readily available
> equivalent... I have a spare Arduino Pro Mini and Nano boards, so if it
> there is any interest in the project, I will stick with Arduino to make
> it more accessible.
> Your feedback is greatly appreciatedThank youYuriy
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/