Here's someone that did the big table. In the end it looks like the head needs to be moved in order to utilize the full potential of the larger table.
http://www.yuriystoys.com/
--------------------------------------------
On Tue, 2/9/16, ffmowers@cox.net [GrizHFMinimill] <GrizHFMinimill@yahoogroups.com> wrote:
Subject: [GrizHFMinimill] Re: Large Table Upgrade LMS
To: GrizHFMinimill@yahoogroups.com
Date: Tuesday, February 9, 2016, 9:38 PM
I did a search and couldn't find any posts from anyone
who has done it. That could just be my poor search skills
though.
From what I understand, the 'large table'
is actually the entire lower portion (everything but the
column and head/electronics). To do the upgrade I'm
taking about, it looks like you bold the solid column to the
large table assembly and then move the head / electronics
over (just pretty much lifts off).
I'm not concerned about the mechanics of the
upgrade, I'm just trying to decide if the benefits are
worth the $350 plus cost. It will give me about 50% more
travel and if I get that and increased accuracy I would
think it would be a good investment
------------------------------------
Posted by: a rien <amriensr@yahoo.com>
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/