Contact Pete Brush: http://olduhfguy.com/
He'll fix it for you.
Chris Wood
LittleMachineShop.com
The premier source of tooling, parts, and accessories for bench top machinists.
396 W. Washington Blvd. #500, Pasadena, CA 91103
(800)981-9663
From: GrizHFMinimill@yahoogroups.com <GrizHFMinimill@yahoogroups.com>
Sent: Sunday, May 26, 2019 6:57 PM
To: GrizHFMinimill@yahoogroups.com
Subject: [GrizHFMinimill] mills spindle controller help
Need some advice on testing the controller for my grizzly mini mill..
I think when I had the cnc spindle un plugged from the mill, I somehow think I reconnected it backwards and the 0-10v was connected to gnd and gnd to 0-10v to the mills control panel..
so I assuming the mills control panel is blown I get no spindle movement either in cnc mode or manual spindle mode.
when I power it up I hear what sounds like a relay clicking in the mills controller the small fan powers up and the green led lights up, if I turn the pot on the orange led lights up but no spindle even with the pot to full speed...
Any thoughts on this, or any test I can try to make sure its the mills controller ?
Thanks gary
__._,_.___
Posted by: Chris Wood <chrisw@littlemachineshop.com>
__,_._,___