> Get a spray mister. It will cool the cutter and spray away the chips
> and hereby avoid that the chips are recut which is cause number one
> for tool failure. In case you´re too cheap for a mister before the
> proof that it really works, get a cheap airbrush, set it´s spray cone
> on the cutter and spray/lube with oil and air. WD40 can be bought in
> gallon containers for close to nothing, a gallon lasts forever. WD40
> is a bad lube but a great cutting agent for aluminum.
>
> Cheers, Johann
I believe that mist cooling lost popularity when people started
considering what they were breathing! Bill in Boulder
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/