>Date: Tue, 15 Nov 2011 15:20:57 -0800
>From: Oliver Fick <ofick@bendbroadband.com>
>Subject: RE: [GrizHFMinimill] Re: Treadmill incline motor
>
>I've been thinking about this, too. I just pulled out the three incline
>motors that I have and each has a very different mechanical setup so I guess
>I will have to hook them up and see what they will do. I'll let you know
>what I find out.
>
>
>
>I get tired of cranking my z-axis up and down by hand so this will be a
>great help if I can make it work. I have measured the torque required to
>lift the 160 lb head and it is 171 oz-inch at the hand crank.
Excuse me, but don't treadmill/shaded pole magnet type motors turn
in only one direction?
Bill
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/