Oliver Fick <ofick@bendbroadband.com> wrote:
>I have run into this problem, too. Some treadmills have an optical or
>magnetic rotation sensor on the belt drive roller. If this is not
>functioning or is disconnected from the controller card the motor will start
>but will turn soon turn off. You need to trace out the circuit and disable
>this on the controller in such a way that it thinks the sensor is working.
>
>
>
>I would give you more specifics but my motor has been set aside for a while
>and it would take me some time to dig out the full details.
>
>
>
>I hope this is hepful.
>
>
>
> _____
>
>From: GrizHFMinimill@yahoogroups.com [mailto:GrizHFMinimill@yahoogroups.com]
>On Behalf Of usarmyfly
>Sent: Friday, November 11, 2011 3:42 PM
>To: GrizHFMinimill@yahoogroups.com
>Subject: [GrizHFMinimill] Treadmill motor with stock controller?
>
>
>
>
>
>For those out there that have used a treadmill motor on their mini mill, did
>you try it with the stock mill board? I tried mine and it would turn on for
>a few seconds and then shut down. I don't know a whole lot about electronics
>on these boards and was looking for ideas. I haven't tried playing with the
>speed pots at all, don't know if it will matter. My motor is a 2.25
>treadmill duty 4 wire (2 blue) and works fine with the M60 controller. I
>don't like how the M60 speeds up and slow down so slow though. Any one have
>any experience?
>
>
>
> _____
>
>size=1 width="100%" noshade color="#a0a0a0" align=center>
>
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2012.0.1869 / Virus Database: 2092/4610 - Release Date: 11/11/11
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/