Thanks,
Glen
--- In GrizHFMinimill@yahoogroups.com, "Rick Grimm" <grimmrlg@...> wrote:
>
> I completed the powerfeed I mentioned a few days ago, you can see the photos in this album:
>
> http://groups.yahoo.com/group/GrizHFMinimill/photos/album/2130350934/pic/list
>
> or view a video at:
>
> http://www.youtube.com/user/grimmrlg?feature=mhee#p/a/u/0/_Cy-zF6R6cI
>
> I found a 24 volt at 2 amps gearmotor with 144 RPM and 6 in/lbs of torque. I checked for more of the same motor but it appears this was a one time only item.
>
> I'm sure a similar motor combo can be found, but I'd be wary of any 24v motor that isn't drawing at least 1 amp or it probably won't have enough power, its sometimes hard to find torque specs on ebay listings, luckily the one I got had a link to the spec sheets. I also would not recommend torque less than about 4 in/lb or RPM under 120.
>
> http://www.ebay.com/itm/130556417718?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 This is the motor speed controller
>
> http://www.ebay.com/itm/200674705469?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 This is the 24v gearmotor
>
> http://www.ebay.com/itm/370524958531?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 This is the 24v power supply
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/