Can you recommend the power supply you used on your setup. Like what I see in your pictures and would like to copy your setup
Paul
--- In GrizHFMinimill@yahoogroups.com, "Rob Potter" <rob@...> wrote:
>
> I've sent an email with attached pictures of my installation directly to
> you, Rysiu.
>
>
>
> Rob Potter
>
> Portland, OR
>
>
>
> From: GrizHFMinimill@yahoogroups.com [mailto:GrizHFMinimill@yahoogroups.com]
> On Behalf Of rysium
> Sent: Monday, December 26, 2011 7:38 AM
> To: GrizHFMinimill@yahoogroups.com
> Subject: [GrizHFMinimill] Re: Ring light measurements
>
>
>
>
>
> Dd you have any pictures of your installation? I'm looking for some light
> that will not extend beyond mill's head.
>
> In the meantime I got myself nice JANSJO lamp from IKEA
> (http://www.ikea.com/us/en/catalog/products/10128734/). Great LED spot light
> for little machine (lathe or mill) with 24" long flexible arm. Easy to mount
> on the machine too (instead of using heavy foot screw the arm to machine).
> For 10 bucks it's a steal.
>
> RysiuM
>
> --- In GrizHFMinimill@yahoogroups.com
> <mailto:GrizHFMinimill%40yahoogroups.com> , "Rob Potter" <rob@> wrote:
> >
> > As far as vendor sources, I was able to fit one of these 24-LED 80mm rings
> > for $4.86
> >
> >
> http://www.dealextreme.com/p/t10-24-led-white-light-car-angel-eye-80mm-diame
> > ter-26001
> >
> >
> >
> > Around one of these 15-LED 60mm rings for $3.28
> >
> >
> http://www.dealextreme.com/p/t10-15-led-white-light-car-angel-eye-60mm-diame
> > ter-25513
> >
> >
> >
> > And put one of these 48-LED festoons for $7.96 behind the concentric rings
> >
> >
> http://www.dealextreme.com/p/t10-ba9s-festoon-2-88w-12v-48-led-car-ceiling-d
> > ome-white-light-bulb-18060
> >
> >
> >
> > Nothing extends out beneath the edges of the mill head, yielding a very
> > clean installation.
> >
> >
> >
> > Rob Potter
> >
> > Portland, OR
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/