-----Original Message-----
From: GrizHFMinimill@yahoogroups.com [mailto:GrizHFMinimill@yahoogroups.com]
On Behalf Of Bill Williams
Sent: Wednesday, November 16, 2011 10:30 AM
To: GrizHFMinimill@yahoogroups.com
Subject: Re: [GrizHFMinimill] Re: Treadmill incline motor
Oliver Fick wrote:
>
>
> I've been thinking about this, too. I just pulled out the three incline
> motors that I have and each has a very different mechanical setup so I
> guess I will have to hook them up and see what they will do. I'll let
> you know what I find out.
>
>
>
> I get tired of cranking my z-axis up and down by hand so this will be a
> great help if I can make it work. I have measured the torque required
> to lift the 160 lb head and it is 171 oz-inch at the hand crank.
Knees weigh that or more! Bill
------------------------------------
Yahoo! Groups Links
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1872 / Virus Database: 2092/4620 - Release Date: 11/16/11
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/GrizHFMinimill/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/GrizHFMinimill/join
(Yahoo! ID required)
<*> To change settings via email:
GrizHFMinimill-digest@yahoogroups.com
GrizHFMinimill-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
GrizHFMinimill-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/